Gold Label Pond Paint Black 2.5L

£99.99
Black Gold Label Aqua Pond Paint



The pond paint market just welcomed Gold Label Aqua Pond Paint.
It was created to make pond sealing simpler.

Water-based paint with an activator enables rollering or brushing Gold Label pond paint easy and drag-free.

Compared to the majority of pond paints on the market today, Gold label Aqua pond paint will cover around 6–8 metres per litre.
Most ponds only require two coatings.
Fast cure times enable quick refilling.
(Before starting, please read the instructions.)




Instructions for Gold Label Pond Paint: Before painting, inspect your surfaces for flaws, cracks, etc., and fill them as necessary.
Vee out the cracks in large concrete cracks to about 10 mm; the surface must be solid and dust-free before bonding.
Use Gold Label Pond & Aquarium Sealer to fill.

Then you can start painting right away.
Despite the fact that Aqua Pond Paint is considerably safer than conventional resin systems, it is advised that you prevent contact by using gloves or barrier cream.
Splashes ought to be cleaned up with soap and water.




Use: DO NOT use when the temperature is below 10 °C.

1. Stir thoroughly for at least two minutes after adding the hardener from the top unit to the paint from the bottom unit. This is VERY IMPORTANT.

PLEASE NOTE: - The paint can be used for 1.5 hours in room temperature after it has been mixed.
The working time will be shortened above 20°C.

2. Immediately after combining, apply with a brush, roller, or spray.
Be sure to work the coating into the corners, etc.
Apply no less than two coats.
When the first coat is touch dry after approximately 6 to 8 hours at 20°c, the second coat can be applied.
The same is true for any additional coats.

3. Depending on the ambient circumstances, the paint will harden in 12 hours and complete its curing process in 3–7 days.
When the paint has entirely dried, wash and drain the surface before adding the final fill.

You recently viewed

Clear recently viewed